Calrec Apollo, Operator'S Manual

Page: 151 / 214

CALREC
Putting Sound in the Picture
151
The requirement to add a height
element to the monitoring system is
available from V7.0 onwards.
This feature provides support for
monitoring immersive signals from an
external source
A new option called “Immersive
Monitoring” is available in the
>Show Settings> General Settings
screen of the main application see Fig 1.
.When this option is enabled, the Misc
Mon LS1 output in Monitor System 1 is
linked to the Main LS output, allowing
external 5.1.2 or 5.1.4 signals from an
external renderer to be monitored through
monitor system 1, of the console using
simple and familiar monitor controls.
When Enabled, the user must set the
width of External Input 143 to 5.1 and
the width of External Input 144 to stereo
(for 5.1.2) or to 5.1 (for 5.1.4).
The normal 5.1 legs of the 5.1.x render
must be connected to External Input
143 and the .2 or .4 height legs must be
connected to External Input 144. The
user can label the External Inputs as
appropriate for ease of identification.
To monitor the renderer, choose External
Input 143 as the source for the Main LS
output and External Input 144 as the
source for the Misc Mon LS1 output.
Both Outputs will have their monitoring
level controlled from the Main LS controls.
IMMERSIVE MONITORING
FIG 1 - ENABLING THE IMMERSIVE MONITORING SYSTEM