manualshive.com logo in svg

Calrec Apollo, Operator'S Manual

Share
Download
Calrec Apollo Operator'S Manual Download Page 103

CALREC 

Putting Sound in the Picture

 

103

The new list will appear below the default 
list and will contain the selected insert 
resources.  Touch the new list to confirm 
this. It is possible to make a new list which 
is empty, by ensuring that no resources 
are selected when touching the ‘Create 
List’ button.

Copying/moving insert resources to 
lists

Resources can be copied or moved 
between lists by selecting the required 
resources in the source list and touching 
‘Copy Lists’ or Move Lists’.  A popup 
dialogue will appear allowing selection of 
the destination list.  Select the destination 
list and touch OK.

Removing insert resources from 
lists

To remove resources from a list, select the 
required resources and touch the ‘Remove 
Inserts’ button.

Renaming lists

Touch the ‘Modify Lists’ button to bring up 
a popup dialogue.  This dialogue allows 
you to select a list and rename it.

Removing lists

To remove a list, select the required list 
and touch the ‘Remove List’ button. A 
popup dialogue will appear asking for 
confirmation of the removal.

Insert Order and Sets

Insert resources can be ordered into sets. 
For a description of sets and the order of 
items within a set, please refer to the Input 
Sources section of this document.

Insert ON / OFF Control

The Insert ON / OFF switch appears on  
the PROCESSING-OVERVIEW panel 
mode.  It must be switched in circuit using 
the INSERT ON button in the 5th Control 
cell , top row as shown in Fig 5.

FIG 5 - INSERT ON / OFF CONTROL

Summary of Contents for Apollo























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands