manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

6-4

Gasoline Specifications

It is recommended that gasoline meet specifications
which were developed by the American Automobile
Manufacturers Association and endorsed by the
Canadian Vehicle Manufacturers’ Association for better
vehicle performance and engine protection. Gasolines
meeting these specifications could provide improved
driveability and emission control system performance
compared to other gasolines.

In Canada, look for 
the “Auto Makers’
Choice” label on 
the pump.

Canada Only

California Fuel

If your vehicle is certified to meet California Emission
Standards (see the underhood emission control label), 
it is designed to operate on fuels that meet California
specifications. If this fuel is not available in states
adopting California emissions standards, your vehicle
will operate satisfactorily on fuels meeting federal
specifications, but emission control system performance
may be affected. The malfunction indicator lamp may
turn on (see “Malfunction Indicator Lamp” in the Index)
and your vehicle may fail a smog

-

check test. If this

occurs, return to your authorized GM dealer for
diagnosis. If it is determined that the condition is caused
by the type of fuel used, repairs may not be covered by
your warranty.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Pivot DXB-B User Manual preview
DXB-B
Brand: Pivot Pages: 4
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Buick 2005 Terraza Owner'S Manual preview
2005 Terraza
Brand: Buick Pages: 428
Yakima K674 Instructions Manual preview
K674
Brand: Yakima Pages: 13
Menabo 000081000000, Fitting Instructions Manual preview
000081000000,
Brand: Menabo Pages: 11
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Oldsmobile 1994 Bravada Owner'S Manual preview
1994 Bravada
Brand: Oldsmobile Pages: 248
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20

Brands by name

Popular brands

Load more brands