Cadillac ESCALADE EXT 2002 Manual Download Page 360

Page: 360 / 427

6-48

1. Remove the two screws

from the lamp assembly.

2. Remove the lamp assembly.

3. Press the release tab and

turn the bulb socket
counterclockwise to
remove it from the
taillamp housing.

4. Pull the bulb straight out from the socket.

5. Press a new bulb into the socket, insert it into the

taillamp housing and turn the socket clockwise into
the taillamp housing until it clicks.

6. Reinstall the rear lamp assembly and tighten

the screws.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands

Cadillac ESCALADE EXT 2002, Manual

Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands