Cadillac ESCALADE EXT 2002 Manual Download Page 132

Page: 132 / 427

2-66

2. Remove cargo panel 3 by pulling the left and right

cargo panel latches, located on the bottom of each
cargo panel, toward you to release (unlock) the cargo
panel latches.

3. Pull the cargo panel up and then out from the

side rails and set it aside. You only need to remove
as many cargo panels as needed for your cargo
carrying needs.

4. Remove cargo panel 2 in the same way and set

it aside.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands

Cadillac ESCALADE EXT 2002, Manual

Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands