manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

4-10

The Stabilitrak system automatically comes on
whenever you start your vehicle.

The Stabilitrak switch,
located to the right of
the steering wheel, 
on the instrument panel,
can be pressed to put 
the Stabilitrak system 
in LIMITED mode.

When the switch is pressed, the STABILITY SYSTEM
LIMITED message is displayed in the message center.
While in LIMITED mode the stability system is less
likely to activate. The stability system can still activate in
LIMITED mode if the vehicle starts to spin, but it will
not activate as quickly as when the system is not in
LIMITED mode. You should put Stabilitrak in the
LIMITED mode if your vehicle is stuck in sand, mud, ice
or snow and you want to “rock” your vehicle to attempt
to free it. See “Rocking Your Vehicle” in the Index.

Steering

Power Steering

If you lose power steering assist because the engine
stops or the system is not functioning, you can steer 
but it will take much more effort.

Steering Tips

Driving on Curves

It’s important to take curves at a reasonable speed.

A lot of the “driver lost control” accidents mentioned 
on the news happen on curves. Here’s why:

Experienced driver or beginner, each of us is subject to
the same laws of physics when driving on curves.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
iDataLink maestro Rr Install Manual preview
maestro Rr
Brand: iDataLink Pages: 106
RAM Ram 3500 2012 User Manual preview
Ram 3500 2012
Brand: RAM Pages: 116
Axxess AX-LR904 Installation Instructions Manual preview
AX-LR904
Brand: Axxess Pages: 8
SeaSucker SX6150 Quick Start Manual preview
SX6150
Brand: SeaSucker Pages: 9
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Bestop Bikini Installation Instructions preview
Bikini
Brand: Bestop Pages: 5
PowerMadd Tri-mount Installation Instructions preview
Tri-mount
Brand: PowerMadd Pages: 3
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
Seat Toledo 2019 Owner'S Manual preview
Toledo 2019
Brand: Seat Pages: 300
Volvo XC70 - ANNEXE 808 Quick Manual preview
XC70 - ANNEXE 808
Brand: Volvo Pages: 8

Brands by name

Popular brands

Load more brands