Cadillac ESCALADE EXT 2002 Manual Download Page 187

Page: 187 / 427

2-121

Remote Lock Feedback

D Horn: Horn chirps on second press of the LOCK

button on the keyless entry transmitter.

D Lamps: Parking lamps flash on each press of the

LOCK button on the keyless entry transmitter.

D Horn and Lamps: Parking lamps flash on each

press, horn chirps on second press of UNLOCK on
the keyless entry transmitter.

D None: No horn or lamp feedback to the LOCK

button on the keyless entry transmitter.

Remote Unlock Feedback

D Horn: Horn chirps on each press of the UNLOCK

button on the keyless entry transmitter.

D Lamps: Parking lamps flash on each press of the

UNLOCK button on the keyless entry transmitter.

D Horn and Lamps: Parking lamps flash and horn

chirps on each press of the UNLOCK button on the
keyless entry transmitter.

D None: No horn or lamp feedback will occur when

the UNLOCK button on the keyless entry transmitter
is pressed.

Headlamp Delay

D None: Headlamps do not stay on after the ignition is

turned to OFF.

D 10/20/30/60/120/180 Seconds: Amount of time

headlamps stay on after the ignition is turned to OFF
when it is dark (switch must be in auto headlamp
position).

Perimeter Lamps

D Enabled: Parking lamps, headlamps and puddle

lamps turn on for 40 seconds when the UNLOCK
button on the keyless entry transmitter is pressed.
This feature only operates when it is dark.

D Disabled: Feature disabled, no perimeter lamps will

come on.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Cadillac ESCALADE EXT 2002, Manual, Page: 187 / 427

Search results

Summary of Contents for ESCALADE EXT 2002

Reviews: