manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

5-35

Spare Tire

Your vehicle, when new, had a fully inflated spare tire.
A spare tire may lose air over time, so check its inflation
pressure regularly. See “Inflation

-

Tire Pressure” and

“Loading Your Vehicle” in the Index for information
regarding proper tire inflation and loading your vehicle.
For instruction on how to remove, install or store a spare
tire, see “Changing a Flat Tire” in the Index.

After installing the spare tire on your vehicle, you
should stop as soon as possible and make sure the spare
is correctly inflated. Have the damaged or flat road tire
repaired or replaced as soon as you can and installed
back onto your vehicle. This way, a spare tire will be
available in case you need it again.

If your vehicle has a spare tire that does not match your
vehicle’s original road tires and wheels in size and type,
do not include the spare in the tire rotation.

If You’re Stuck: In Sand, Mud, 
Ice or Snow

In order to free your vehicle when it is stuck, you will
need to spin the wheels, but you don’t want to spin 
your wheels too fast. The method known as “rocking”
can help you get out when you’re stuck, but you must
use caution.

CAUTION:

If you let your tires spin at high speed, they can
explode, and you or others could be injured. 
And, the transmission or other parts of the
vehicle can overheat. That could cause an engine
compartment fire or other damage. When you’re
stuck, spin the wheels as little as possible. Don’t
spin the wheels above 35 mph (55 km/h) as shown
on the speedometer.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
Axxess AX-DSPX-HYKIA2 Installation Instructions preview
AX-DSPX-HYKIA2
Brand: Axxess Pages: 4
Vintage Air 473275 Manual preview
473275
Brand: Vintage Air Pages: 14
Mazda 2 2016 Owner'S Manual preview
2 2016
Brand: Mazda Pages: 720
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
BrandMotion FLTW-7690 Installation Instructions preview
FLTW-7690
Brand: BrandMotion Pages: 2
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Sears 580.32601 Owner'S Manual preview
580.32601
Brand: Sears Pages: 41
Whispbar K919W Fitting Instructions Manual preview
K919W
Brand: Whispbar Pages: 17
Oldsmobile 2003 Silhouette Owner'S Manual preview
2003 Silhouette
Brand: Oldsmobile Pages: 466
Black+Decker BXAE00011 Operating Instructions Manual preview
BXAE00011
Brand: Black+Decker Pages: 21
Beeper RW050RF User& Installer'S Manual preview
RW050RF
Brand: Beeper Pages: 20

Brands by name

Popular brands

Load more brands