manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

6-21

Checking the Fluid Level

Prepare your vehicle as follows:
D Park your vehicle on a level place. Keep the 

engine running.

D With the parking brake applied, place the shift lever

in PARK (P).

D With your foot on the brake pedal, move the shift

lever through each gear range, pausing for about
three seconds in each range. Then, position the shift
lever in PARK (P).

D Let the engine run at idle for three minutes or more.

Then, without shutting off the engine, follow these steps:

Your vehicle will have
either the transmission
dipstick handle labeled
“TRANS/LOCK” or 
will be labeled with the
graphic shown.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
HALE MM-03 Driver Manual preview
MM-03
Brand: HALE Pages: 44
Fab Fours BLACK STEEL S2560 Installation Instructions Manual preview
BLACK STEEL S2560
Brand: Fab Fours Pages: 9
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
GMC YUKON 2018 Owner'S Manual preview
YUKON 2018
Brand: GMC Pages: 425
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
PullRite 20K OE Series Installation Instructions Manual preview
20K OE Series
Brand: PullRite Pages: 10
Ford Windstar 2003 Quick Reference Manual preview
Windstar 2003
Brand: Ford Pages: 2
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Cadillac 2004 ESCALADE Customer Convenience/Personalization Manual preview
2004 ESCALADE
Brand: Cadillac Pages: 20
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18

Brands by name

Popular brands

Load more brands