manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

3-3

Mode Knob 

--

 Manual Operation

The right knob on the control panel allows you to
choose the direction of air delivery.

You can choose to set the climate control system
operations manually, or let the system work
automatically by turning the knob on the control 
panel to AUTO. See “Mode Knob 

--

 Automatic

Operation” later in this section.

(Vent): This mode directs most of the air through

the instrument panel outlets and a small amount through
the floor outlets.

(Bi

-

level): This mode directs air through the floor

outlets as well as the instrument panel outlets.

(Floor): This mode directs most of the airflow

through the floor outlets and some air through the
windshield defroster outlets. Recirculation will not be
available in this mode. See “Recirculation” following
for more information.

(Blend): This mode divides airflow equally

between the floor outlets and the windshield defroster
outlets. The air conditioning compressor may run 
to dehumidify the air to prevent window fogging.
Recirculation will not be available in this mode. 
See “Recirculation” following for more information.

(Defrost): This mode directs most air through 

the windshield defroster outlets and some through the
floor outlets. The air conditioning compressor may 
run to dehumidify the air to prevent window fogging.
Recirculation will not be available in this mode. 
See “Recirculation” following for more information.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Rati Armster 2 User Manual preview
Armster 2
Brand: Rati Pages: 2
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
Wagan Easy Air Auto Screen User Manual preview
Easy Air Auto Screen
Brand: Wagan Pages: 8
S&B Filters 75-5053 Installation Instructions preview
75-5053
Brand: S&B Filters Pages: 4
Mazda 2016 CX3 Service Information preview
2016 CX3
Brand: Mazda Pages: 3
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Prime Design FEA-0004 Assembly Instructions Manual preview
FEA-0004
Brand: Prime Design Pages: 12
Masterbuilt Hitch-Haul 30110315 Operation Manual & Safety Instructions preview
Hitch-Haul 30110315
Brand: Masterbuilt Pages: 2
EUFAB 16559 Operating Instructions Manual preview
16559
Brand: EUFAB Pages: 12
Westfalia 17 56 46 Instruction Manual preview
17 56 46
Brand: Westfalia Pages: 2
Buick 2006 LaCrosse Getting To Know Manual preview
2006 LaCrosse
Brand: Buick Pages: 20
INNO TR163 Installation Instructions preview
TR163
Brand: INNO Pages: 3
travall TDG1166 Fitting Instructions preview
TDG1166
Brand: travall Pages: 4

Brands by name

Popular brands

Load more brands