manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

7-22

Fuel System Inspection

Inspect the complete fuel system for damage or leaks.

Engine Cooling System Inspection

Inspect the hoses and have them replaced if they are
cracked, swollen or deteriorated. Inspect all pipes,
fittings and clamps; replace as needed. Clean the 
outside of the radiator and air conditioning condenser.
To help ensure proper operation, a pressure test of the
cooling system and pressure cap is recommended at
least once a year.

Transfer Case and Front Axle 
(All-Wheel Drive) Inspection

Every 12 months or at engine oil change intervals, 
check front axle and transfer case and add lubricant
when necessary. A fluid loss could indicate a problem;
check and have it repaired, if needed. Check vent hose 
at transfer case for kinks and proper installation.

Brake System Inspection

Inspect the complete system. Inspect brake lines and
hoses for proper hook

-

up, binding, leaks, cracks,

chafing, etc. Inspect disc brake pads for wear and 
rotors for surface condition. Inspect other brake parts,
including calipers, parking brake, etc. You may need to
have your brakes inspected more often if your driving
habits or conditions result in frequent braking.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Toyota 2012 Rav4 Owner'S Manual preview
2012 Rav4
Brand: Toyota Pages: 529
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
TOPPOINT LT95090 Quick Start Manual preview
LT95090
Brand: TOPPOINT Pages: 2
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Kuda 293950 Installation Instruction preview
293950
Brand: Kuda Pages: 3
Kuda-Phonebase 284380 Installation Instruction preview
284380
Brand: Kuda-Phonebase Pages: 3
LedGlow Advanced Million Color Installation Instructions preview
Advanced Million Color
Brand: LedGlow Pages: 4
Hyundai TUCSON 2022 Quick Reference Manual preview
TUCSON 2022
Brand: Hyundai Pages: 32
TrailPRO TPRGBW4 Quick Start Manual preview
TPRGBW4
Brand: TrailPRO Pages: 3
Kuda-Phonebase 296570 Installation Instruction preview
296570
Brand: Kuda-Phonebase Pages: 6

Brands by name

Popular brands

Load more brands