manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

5-36

NOTICE:

Spinning your wheels can destroy parts of your
vehicle as well as the tires. If you spin the wheels
too fast while shifting your transmission back
and forth, you can destroy your transmission.

For information about using tire chains on your vehicle,
see “Tire Chains” in the Index.

Rocking Your Vehicle To Get It Out

First, turn your steering wheel left and right. That will
clear the area around your front wheels. Press the
Stabitrak button so that the STABILITY SYSTEM
LIMITED message appears in the message center. Then
shift back and forth between REVERSE (R) and a
forward gear, spinning the wheels as little as possible.
Release the accelerator pedal while you shift, and press
lightly on the accelerator pedal when the transmission is
in gear. By slowly spinning your wheels in the forward
and reverse directions, you will cause a rocking motion
that may free your vehicle. If that doesn’t get you out
after a few tries, you may need to be towed out. Or, you
can use your recovery hooks if your vehicle has them. If
you do need to be towed out, see “Towing Your Vehicle”
in the Index.

Using the Recovery Hooks

Your vehicle is equipped with recovery hooks. 
The hooks are provided at the front of your vehicle. 
You may need to use them if you’re stuck off

-

road 

and need to be pulled to some place where you can
continue driving.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Daihatsu Mira Manual preview
Mira
Brand: Daihatsu Pages: 340
TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Brand: Yakima Pages: 15
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Whispbar K604W Fitting Instructions Manual preview
K604W
Brand: Whispbar Pages: 15
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Nav TV Ford 4” UNI-CAM Manual preview
Ford 4” UNI-CAM
Brand: Nav TV Pages: 6
Saab 2007 9-3 Remote Starter Owner'S Manual preview
2007 9-3 Remote Starter
Brand: Saab Pages: 304
TATA Motors Indigo LE Owner'S Manual & Service Book preview
Indigo LE
Brand: TATA Motors Pages: 151
Thule QUICKDRAW RACHET TIE-DOWNS 855 User Manual preview
QUICKDRAW RACHET TIE-DOWNS 855
Brand: Thule Pages: 3
Seat Toledo 2019 Owner'S Manual preview
Toledo 2019
Brand: Seat Pages: 300
Valeo MBHL Operating Manual preview
MBHL
Brand: Valeo Pages: 29
Cadillac 2007 DTS Owner'S Manual preview
2007 DTS
Brand: Cadillac Pages: 508
Kia 2007 Magentis Owner'S Manual preview
2007 Magentis
Brand: Kia Pages: 289

Brands by name

Popular brands

Load more brands