Cadillac ESCALADE EXT 2002 Manual Download Page 359

Page: 359 / 427

6-47

1. Remove the headlamp assembly as described

previously.

2. Remove the rubber, circular

shaped bulb cap for the

affected bulb from the headlamp assembly.

3. Press the locking release lever, turn the bulb

socket counterclockwise and remove it from the
headlamp assembly. (There is no lock for the
sidemarker lamp.)

4. Remove the old bulb from the bulb socket.

5. Put the new bulb into the bulb socket.

6. Put the bulb socket into the turn signal housing and

turn it clockwise until it locks. (There is no lock for
the sidemarker lamp.)

7. Reinstall the rubber, circular

shaped bulb cap to the

headlamp assembly.

8. Put the headlamp assembly back into the vehicle by

reversing the previous mentioned steps.

Center High Mounted Stoplamp (CHMSL)

It is recommended that this component be replaced as a
unit by your dealer.

Taillamps

A. Stop Lamp/Tail Lamp

B. Turn Signal Lamp/

Tail Lamp

C. Back

Up Lamp

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands

Cadillac ESCALADE EXT 2002, Manual

Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands