Cadillac ESCALADE EXT 2002 Manual Download Page 291 | Manualshive

Page: 291 / 427

background image

5-16

NOTICE:

In cold weather, water can freeze and crack the
engine, radiator, heater core and other parts.
So use the recommended coolant.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

1. Park the vehicle on a level surface. You can remove

the coolant surge tank pressure cap when the cooling
system, including the coolant surge tank pressure cap
and upper radiator hose, is no longer hot. Turn the
pressure cap slowly counterclockwise (left) about
one full turn. If you hear a hiss, wait for that to stop.
A hiss means there is still some pressure left.

«
...
289
290
291
292
293
...
»

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Brand: Back View Pages: 168

Brand: Quadratec Pages: 8

21 COVERT Series

Brand: Code 3 Pages: 16

2012 Escalade Hybrid

Brand: Cadillac Pages: 90

Brand: Ford Pages: 22

Brand: kincrome Pages: 6

Brand: Dometic Pages: 158

MagicWatch MWE250

Brand: Waeco Pages: 172

Brand: Oldsmobile Pages: 2

Brand: Jeep Pages: 16

Brand: Audi Pages: 4

Brand: Audiovox Pages: 3

Brand: Victory 4x4 Pages: 9

Brand: Draw tite Pages: 4

Brand: Rugged Ridge Pages: 2

Brand: Skoda Pages: 2

Dynamic Power Management Home - Module

Brand: newmotion Pages: 20

Brand: Mopar Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands