manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual, Page: 137 / 427

Share
Download
Cadillac ESCALADE EXT 2002 Manual Download Page 137

2-71

7. Close both top and bottom mechanisms at the center

of the bag (bag should now be tightly secured).

Reinstalling the Cargo Cover Panels

You only need to reinstall as many cargo panels as you wish.

1. Remove the cargo panel(s) from the storage bag.

You can either leave the bag attached to the side of
the cargo area while it is not in use, or you can store
it outside of the vehicle.

2. Starting with cargo panel 1, place the latches in the

open (unlocked) position. Place cargo panel 1 on the
cargo area rails while holding the back of the cargo
panel up.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments