manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

5-21

Removing the Spare Tire and Tools

The jack and wheel blocks are located under a cover
near the passenger side seat.

To remove the jack and wheel blocks, do the following:

Rear Seat (Passenger Side) Jack Cover

1. Remove the jack cover by turning the two wing nuts

one

-

quarter turn counterclockwise and pulling the

jack cover off.

2. Remove the wheel blocks by turning the wing nut

counterclockwise.

3. Release the bottle jack from its holder by turning the

knob on the jack counterclockwise to lower the jack
head from the bracket.

The tools for changing a flat tire are located in the
passenger’s side Top

-

Box Storage unit.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Lancia Delta Owner'S Handbook Manual preview
Delta
Brand: Lancia Pages: 276
T-Tech TT100 User Manual preview
TT100
Brand: T-Tech Pages: 38
Harbor Freight Tools 92043 Assembly And Operating Instructions preview
92043
Brand: Harbor Freight Tools Pages: 4
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Dometic GROUP DRS2 Installation And Operating Manual preview
DRS2
Brand: Dometic GROUP Pages: 20
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
Wagan 2227-1 User Manual preview
2227-1
Brand: Wagan Pages: 8
Thermo King T- series Driver Manual To Simple Operation preview
T- series
Brand: Thermo King Pages: 2
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Hyundai SANTA FE 2020 Getting Started Manual preview
SANTA FE 2020
Brand: Hyundai Pages: 19
Westin 22-1065 Instructions preview
22-1065
Brand: Westin Pages: 3
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
Joie i-Level Instruction Manual preview
i-Level
Brand: Joie Pages: 53
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Motoalliance Denali MA11737 Manual preview
Denali MA11737
Brand: Motoalliance Pages: 4
Mazda Auto-Dimming Mirror User Manual preview
Auto-Dimming Mirror
Brand: Mazda Pages: 2

Brands by name

Popular brands

Load more brands