manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

2-40

Running Your Engine While You’re
Parked

It’s better not to park with the engine running. But if you
ever have to, here are some things to know.

CAUTION:

Idling the engine with the climate control system
off could allow dangerous exhaust into your
vehicle. See the earlier Caution under “Engine
Exhaust.”

Also, idling in a closed

-

in place can let deadly

carbon monoxide (CO) into your vehicle even if
the fan is at the highest setting. One place this
can happen is a garage. Exhaust 

--

 with 

CO 

--

 can come in easily. NEVER park in a

garage with the engine running.

Another closed

-

in place can be a blizzard. 

See “Blizzard” in the Index.

CAUTION:

It can be dangerous to get out of your vehicle if
the shift lever is not fully in PARK (P) with the
parking brake firmly set. Your vehicle can roll.
Don’t leave your vehicle when the engine is
running unless you have to. If you’ve left the
engine running, the vehicle can move suddenly.
You or others could be injured. To be sure your
vehicle won’t move, even when you’re on fairly
level ground, always set your parking brake and
move the shift lever to PARK (P).

Follow the proper steps to be sure your vehicle won’t
move. See “Shifting Into PARK (P)” in the Index.

If you’re pulling a trailer, see “Towing a Trailer” in 
the Index.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Yuasa SmartShot Automatic 12V 1.5 Amp 5 Stage Technical Manual preview
SmartShot Automatic 12V 1.5 Amp 5 Stage
Brand: Yuasa Pages: 44
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
Volvo B13R Driver'S Handbook Manual preview
B13R
Brand: Volvo Pages: 24
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
ECS FIA-030-B Fitting Instructions preview
FIA-030-B
Brand: ECS Pages: 4
Whispbar WB751 Manual preview
WB751
Brand: Whispbar Pages: 15
Enduro EM203 User Manual preview
EM203
Brand: Enduro Pages: 52
Saab 32 025 907 Installation Instructions Manual preview
32 025 907
Brand: Saab Pages: 37
Curt Manufacturing 58963 Installation Manual preview
58963
Brand: Curt Manufacturing Pages: 4
Whispbar K559W Fitting Instructions Manual preview
K559W
Brand: Whispbar Pages: 112
Reliant Rebel 700 1967 Workshop Manual preview
Rebel 700 1967
Brand: Reliant Pages: 116

Brands by name

Popular brands

Load more brands