Cadillac ESCALADE EXT 2002 Manual Download Page 71

Page: 71 / 427

2-5

Your vehicle has one
double

sided key for the

ignition, door locks and side
storage boxes.

Your vehicle also has a key
that locks and unlocks only
the center floor console.

If you ever lose your keys, your dealer will be able to
assist you with obtaining replacements.

In an emergency contact Cadillac Roadside Service. See
“Roadside Service” in the Index for more information.

If you ever lock your keys in your vehicle, you may be
able to have your doors unlocked automatically with
the OnStar

system if you have an active OnStar

subscription. For more information see “OnStar” in
the Index.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands

Cadillac ESCALADE EXT 2002, Manual

Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands