manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

2-57

Compass Operation

Press the COMP button once briefly to turn the compass
on or off.

When the ignition and the compass feature are on, 
the compass will show two character boxes for
approximately two seconds. After two seconds, 
the mirror will display the compass heading.

When cleaning the mirror, use a paper towel or similar
material dampened with window cleaner. Do not spray
window cleaner directly on the mirror as that may cause
the liquid cleaner to enter the mirror housing.

Compass Calibration

The compass may need calibration if:
D After five seconds, the display does not show a

compass heading (N for North, for example), there
may be a strong magnetic field interfering with the
compass. Such interference may be caused by a
magnetic antenna mount, magnetic note pad holder
or a similar magnetic item.

D The compass does not display the correct heading

and the compass zone variance is set correctly.

In order to calibrate, CAL must be displayed in the
mirror compass windows. If CAL is not displayed, push
in the COMP button for approximately eight seconds or
until CAL is displayed.

The compass can be calibrated in one of two ways:
D Drive the vehicle in circles at five mph (8 km/h) or

less until the display reads a direction, or

D drive the vehicle on your everyday routine and after

several turns the compass will become calibrated and
will display a direction.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Safe Fleet PRIME DESIGN VRI3-E-PM11 Manual preview
PRIME DESIGN VRI3-E-PM11
Brand: Safe Fleet Pages: 12
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8
Mercedes-Benz A 150 Owner'S Manual preview
A 150
Brand: Mercedes-Benz Pages: 305
Volvo S90 TWIN ENGINE Owner'S Manual preview
S90 TWIN ENGINE
Brand: Volvo Pages: 662
Menabo ANTARES KIT+1 Assembly & Instruction Manual preview
ANTARES KIT+1
Brand: Menabo Pages: 8
Seat Arona 2018 Owner'S Manual preview
Arona 2018
Brand: Seat Pages: 372
Honda 2000 RL Owner'S Manual preview
2000 RL
Brand: Honda Pages: 330
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43

Brands by name

Popular brands

Load more brands