manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

2-100

Anti-Lock Brake System Warning Light

With the anti

-

lock brake

system, this light will 
come on when you start
your engine and may stay
on for several seconds.
That’s normal.

If the light stays on, or comes on when you’re driving,
your vehicle needs service. If the regular brake system
warning light isn’t on, you still have brakes, but you
don’t have anti

-

lock brakes. If the regular brake system

warning light is also on, you don’t have anti

-

lock brakes

and there’s a problem with your regular brakes. See
“Brake System Warning Light” earlier in this section.

The anti

-

lock brake system warning light should come

on briefly when you turn the ignition key to RUN. If the
light doesn’t come on then, have it fixed so it will be
ready to warn you if there is a problem.

Engine Coolant Temperature Gage

United States

Canada

This gage shows the engine coolant temperature.

It also provides an indicator of how hard your vehicle is
working. During a majority of the operation, the gage
will read 210

_F (100_C) or less. If you are pulling a

load or going up hills, it is normal for the temperature to
fluctuate and approach the 250

_F (122_C) mark. If the

gage reaches the 260

_F (125_C) mark, it indicates that

the cooling system is working beyond its capacity.

See “Engine Overheating” in the Index.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Tesla V2 SUPERCHARGER First Responder'S Manual preview
V2 SUPERCHARGER
Brand: Tesla Pages: 9
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
Warn 70948 Installation Instructions preview
70948
Brand: Warn Pages: 5
Guidosimplex 907P User Manual preview
907P
Brand: Guidosimplex Pages: 8
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
Westfalia 17 56 46 Instruction Manual preview
17 56 46
Brand: Westfalia Pages: 2
Brodit Heavy Duty ProClip Installation Instructions preview
Heavy Duty ProClip
Brand: Brodit Pages: 2
Jeep 2012 Patriot Series Owner'S Manual preview
2012 Patriot Series
Brand: Jeep Pages: 505
hager XEV1R22T2 Series Operating Instructions Manual preview
XEV1R22T2 Series
Brand: hager Pages: 14

Brands by name

Popular brands

Load more brands