manualshive.com logo in svg

Cadillac ESCALADE EXT 2002, Manual

The Cadillac ESCALADE EXT 2002 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining your vehicle. Download the manual now from manualshive.com to ensure the best performance and longevity of your Cadillac ESCALADE EXT 2002.

Share
Download
background image

1-10

Safety Belts: They’re for Everyone

This part of the manual tells you how to use safety belts
properly. It also tells you some things you should not do
with safety belts.

And it explains the air bag system.

CAUTION:

Don’t let anyone ride where he or she can’t wear
a safety belt properly. If you are in a crash and
you’re not wearing a safety belt, your injuries
can be much worse. You can hit things inside the
vehicle or be ejected from it. You can be seriously
injured or killed. In the same crash, you might
not be if you are buckled up. Always fasten your
safety belt, and check that your passengers’ belts
are fastened properly too.

CAUTION:

It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision,
people riding in these areas are more likely to be
seriously injured or killed. Do not allow people 
to ride in any area of your vehicle that is not
equipped with seats and safety belts. Be sure
everyone in your vehicle is in a seat and using a
safety belt properly.

Your vehicle has a light 
that comes on as a reminder
to buckle up. See “Safety
Belt Reminder Light” in 
the Index.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ESCALADE EXT 2002

Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
Pacbrake C44059 Installation Manual preview
C44059
Brand: Pacbrake Pages: 14
iDataLink BLADE-AL(TB)-TL2 Install Manual preview
BLADE-AL(TB)-TL2
Brand: iDataLink Pages: 9
Magneti Marelli BCF184 Installation Instructions preview
BCF184
Brand: Magneti Marelli Pages: 2
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
iArmor EDGE IA-N098 Quick Start Manual preview
EDGE IA-N098
Brand: iArmor Pages: 4
RAM 2012 Truck Chassis cab Owner'S Manual preview
2012 Truck Chassis cab
Brand: RAM Pages: 506
Ranger design 1525-NS Installation Manual preview
1525-NS
Brand: Ranger design Pages: 22
National Cycle Quantum hardcoated N30216 Assembly Instructions And Owner'S Manual preview
Quantum hardcoated N30216
Brand: National Cycle Pages: 3
Mitsubishi Fuso FK 2010 Owner'S Manual preview
Fuso FK 2010
Brand: Mitsubishi Pages: 362
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Scosche HAQ02 Quick Start Manual preview
HAQ02
Brand: Scosche Pages: 8

Brands by name

Popular brands

Load more brands