Cadillac ESCALADE EXT 2002 Manual Download Page 185

Page: 185 / 427

2-119

Timer

D Each press of the ON/OFF button will turn the timer

on or off.

D The RESET button will reset the timer to 00:00:00.
D If turned on, the timer will accumulate whenever

the SIC is powered (the engine does not have to
be running).

D The timer will rollover after 99:59:59.

Vehicle History Last 15 Days

D The first press of the arrow button will display the

maximum speed and accumulated mileage for the
current day.

D Every press of the arrow button after will display the

maximum speed and accumulated mileage for the
previous day.

D This feature requires the date and time to be set

correctly. Refer to the setting of day/date/time under
the MENU button explained later in this section.

Annual Mileage

D The annual mileage displayed is the mileage

accumulated since the annual mileage was reset.

D Pressing the RESET button will reset the annual

mileage to 0.

D Pressing the arrow button will display the ratio of

personal trip computer mileage to annual mileage as
a percent.

D Pressing the arrow button again will display the ratio

of business trip computer mileage to annual mileage
as a percent.

Summary of Contents for ESCALADE EXT 2002












































































































































































































































































































































































































































Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands

Cadillac ESCALADE EXT 2002, Manual

Search results

Summary of Contents for ESCALADE EXT 2002

Reviews:

Related manuals for ESCALADE EXT 2002

Brands by name

Popular brands