Cadillac CT62018 Owner'S Manual Download Page 12

Page: 12 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

IN BRIEF

Seat Adjustment

Power Seats

Platinum Seat Shown, Base and

Uplevel Seats Similar

To adjust the seat:

Move the seat forward or rearward
by sliding the control forward or
rearward.

Raise or lower the front part of the
seat cushion by moving the front
of the control up or down.

Raise or lower the seat by moving
the rear of the control up or down.

See

Power Seat Adjustment

See

Thigh Support Adjustment

Uplevel Seat Adjustment

If equipped, the ignition must be on
to use all uplevel seat features.

Platinum Seat Shown, Uplevel Seat

Similar

1. Feature Select
2. Up
3. Forward
4. Down
5. Rearward

Press Feature Select (1) to display
seat adjustments on the
infotainment display. Press and
release or hold to scroll through
features.

Press Up (2) to make upward
adjustments of the selected
feature.

Press Forward (3) to make forward
adjustments of the selected
feature.

Press Down (4) to make downward
adjustments of the selected
feature.

Press Rearward (5) to make
rearward adjustments of the
selected feature.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 12 / 445

Search results

Summary of Contents for CT62018

Reviews: