Cadillac CT62018 Owner'S Manual Download Page 54 | Manualshive

Page: 54 / 445

Cadillac CT62018 Owner'S Manual Download Page 54

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

KEYS, DOORS, AND WINDOWS

53

The power sounder provides an
audible alarm, which is distinct from
the vehicle

’

s horn. It has its own

power source, and can sound an alarm
if the vehicle

’

s battery is

compromised.

The inclination sensor can set off the
alarm if it senses movement of the
vehicle, such as a change in vehicle
orientation.

The intrusion sensor monitors the
vehicle interior, and can activate the
alarm if it senses unauthorized entry
into the vehicle

’

s interior. Do not

allow passengers or pets to remain in
the vehicle when the intrusion sensor
is activated.

Before arming the theft-deterrent
system and activating the intrusion
sensor:

.

Make sure all doors and windows
are completely closed.

.

Secure any loose items such as
sunshades.

.

Make sure there are no
obstructions blocking the sensors
in the front overhead console.

Inclination and Intrusion
Sensors Disable Switch

It is recommended that the intrusion
and inclination sensors be deactivated
if pets are left in the vehicle or if the
vehicle is being transported.

With the vehicle turned off, press

o

in the front overhead console. The
indicator light will come on
momentarily, indicating that these
sensors have been disabled for the
next alarm system arming cycle.

Immobilizer

See

Radio Frequency Statement

Immobilizer Operation

This vehicle has a passive
theft-deterrent system.

The system does not have to be
manually armed or disarmed.

The vehicle is automatically
immobilized when the vehicle is
turned off.

The immobilization system is
disarmed when the vehicle is started
or the ignition is in ACC/ACCESSORY
and a valid transmitter is present in
the vehicle.

The security light, in the instrument
cluster, comes on if there is a problem
with arming or disarming the
theft-deterrent system.

The system has one or more RKE
transmitters matched to an
immobilizer control unit in the
vehicle. Only a correctly matched RKE

«
...
52
53
54
55
56
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments