Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 114 / 445

Share

Page: 114 / 445

Cadillac CT62018 Owner'S Manual Download Page 114

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

SEATS AND RESTRAINTS

113

Tilt the latch plate to adjust the
belt if needed.

4. Push the latch plate into the

buckle until it clicks.

Position the release button on
the buckle, away from the child
restraint system, so that the seat
belt could be quickly unbuckled
if necessary.

5. Pull the shoulder belt all the way

out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.

6. To tighten the belt, push down

on the child restraint, pull the
shoulder portion of the belt to
tighten the lap portion of the
belt, and feed the shoulder belt
back into the retractor. When
installing a forward-facing child
restraint, it may be helpful to use
your knee to push down on the
child restraint as you tighten
the belt.

Try to pull the belt out of the
retractor to make sure the
retractor is locked. If the
retractor is not locked, repeat
Steps 5 and 6.

«
...
112
113
114
115
116
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments