Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 174 / 445

Share

Page: 174 / 445

Cadillac CT62018 Owner'S Manual Download Page 174

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

INSTRUMENTS AND CONTROLS

173

Select Off or On.

Collision/Detection Systems

Select and the following may be
displayed:

.

Alert Type

.

Forward Collision System

.

Front Pedestrian Detection

.

Rear Cross Traffic Alert

.

Adaptive Cruise Go Notifier

.

Lane Change Alert

Alert Type

This feature will set crash alerts to
beeps or seat vibrations. This setting
affects all crash alerts including
Forward Collision, Lane Departure
Warning, Adaptive Cruise Control,
Parking Assist, and Backing Warning
alerts.

Select Beeps or Safety Alert Seat.

Forward Collision System

This feature will turn on or off the
Forward Collision Alert (FCA) and
Forward Automatic Braking (FAB).
The Off setting disables all FCA and

FAB functions. With the Alert and
Brake setting, both FCA and FAB are
available. The Alert setting disables
FAB, but if the vehicle has Adaptive
Cruise Control (ACC), some
last-second automatic braking
capability is still provided, though less
likely to occur. See

Forward Automatic

Braking (FAB)

Select Off, Alert and Brake, or Alert.

Front Pedestrian Detection

This feature will turn on or off the
Front Pedestrian Braking (FPB) system
alerts and automatic braking. The Off
setting disables all FPB functions.
With the Alert & Brake setting, system
alerts and automatic braking are both
available. The Alert setting disables
automatic braking. See

Pedestrian Braking (FPB) System

.

Select Off, Alert, or Alert & Brake.

Rear Cross Traffic Alert

This allows the Rear Cross Traffic
Alert feature to be turned on or off.

Select Off or On.

Adaptive Cruise Go Notifier

This feature will give a reminder that
Adaptive Cruise Control provides
when it has brought the vehicle to a
complete stop behind another
stopping vehicle, and then that vehicle
drives on.

Select Off or On.

Lane Change Alert

This allows the Lane Change Alert
feature to be turned on or off.

Select Off or On.

Comfort and Convenience

Select and the following may display:

.

Auto Memory Recall

.

Easy Exit Options

.

Chime Volume

.

Reverse Tilt Mirror

.

Auto Mirror Folding

.

Rainsense Wipers

«
...
172
173
174
175
176
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments