Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 133 / 445

Share

Page: 133 / 445

Cadillac CT62018 Owner'S Manual Download Page 133

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

132

INSTRUMENTS AND CONTROLS

The PLUG-IN instrument cluster
displays a preview of information that
includes electric range, charging,
odometer, and battery status. This
happens upon entry when the driver
door is opened before starting the
vehicle. This preview will dismiss after
starting the vehicle or soon after
closing the driver door.

There are several screens that may
display depending on the current
charging status.

The CHARGING OVERRIDE/
INTERRUPTION OCCURRED message
may display to indicate that a
charging override or interruption has
occurred due to one or more of the
following events:

.

Override of the charge settings by
the owner.

.

Unintended interruption of AC
power at the vehicle's charge port.

Reconfigurable Instrument
Cluster

The cluster display layout can be
changed.

Balanced Configuration

The Balanced configuration has three
interactive display zones: one in the
center of each of the gauges.

Enhanced Configuration

The Enhanced configuration has three
interactive display zones.

Performance Configuration (If

Equipped)

The Performance configuration has
two interactive display zones.

Use the five-way control on the right
side of the steering wheel to move
between the different display zones
and scroll through the different
displays.

To change the cluster configuration:

1. Find the Options page in one of

the interactive display zones on
the cluster.

2. Press SEL to enter the

Options menu.

3. Scroll down to highlight Display

Layout. Then press SEL to
select it.

«
...
131
132
133
134
135
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments