Cadillac CT62018 Owner'S Manual Download Page 167

Page: 167 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

166

INSTRUMENTS AND CONTROLS

HUD Display on the Vehicle

Windshield

The HUD may display some of the
following vehicle information and
vehicle messages or alerts:

Speed

Tachometer

Audio

Phone

Navigation

Collision Alert

Cruise Control

Lane Keep Assist

Low Fuel

Some vehicle messages or alerts
displayed in the HUD may be cleared
by using the steering wheel controls.
See

Vehicle Messages

169

The HUD control is to the left of the
steering wheel.

To adjust the HUD image:

1. Adjust the driver seat.

2. Start the engine.

3. Use the following settings to

adjust the HUD.

Press down or lift up to center

the HUD image. The HUD image can
only be adjusted up and down, not
side to side.

Press to select the display view.

Each press will change the
display view.

Lift up and hold to brighten the

display. Press down and hold to dim
the display. Hold down to turn the
display off.

The HUD image will automatically
dim and brighten to compensate for
outside lighting. The HUD brightness
control can also be adjusted as
needed.

The HUD image can temporarily light
up depending on the angle and
position of the sunlight on the HUD
display. This is normal.

Polarized sunglasses could make the
HUD image harder to see.

Head-Up Display (HUD) Rotation
Option

This feature allows for adjusting the
angle of the HUD image.

Press SEL on the steering wheel
controls while Head-up Display
Rotation is highlighted to enter Adjust
Mode. Press

to adjust the

angle of the HUD display. Press

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 167 / 445

Search results

Summary of Contents for CT62018

Reviews: