Cadillac CT62018 Owner'S Manual Download Page 76 | Manualshive

Page: 76 / 445

Cadillac CT62018 Owner'S Manual Download Page 76

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

SEATS AND RESTRAINTS

75

vehicle through the rear door and left
the vehicle without the vehicle being
shut off.

The feature can be turned on or off.
See

Vehicle Personalization

.

Rear Seat Adjustment

{

Warning

The power seats will work with the
ignition off. Children could operate
the power seats and be injured.
Never leave children alone in the
vehicle.

Caution

Do not adjust the power seat when
a child restraint is installed.
Adjusting the seat may cause
damage to the installed child
restraint. Use the window lockout
button on the driver door to
prevent adjustment of the seat
whenever a child restraint is
installed.

If equipped, the armrest may have
seat adjustment controls. The rear
seat adjustment controls are locked
when the window lockout switch is
engaged.

Platinum Rear Seat

1. Seatback Display and Lumbar

Adjustment Control

2. Up
3. Rearward
4. Down
5. Forward
6. Power Seat Adjustment
7. Power Seat Adjustment
8. Massage

When the seatback display control (1)
is toggled, a panel display will be
activated from the driver or passenger
seatback. The rear seatback will
automatically recline when the rear
seat is moved forward.

To adjust the seat, if equipped:

.

Move the seat forward or rearward
by sliding the control (6) forward
or rearward or by tilting the
control (7) forward or rearward.

.

Raise or lower the front part of the
seat cushion by moving the front
of the control (6) up or down.

.

Raise or lower the seat by moving
the rear of the control (6) up
or down.

To activate the massage feature,
if equipped:

1. Press the seatback display

control (1).

2. Press up (2) or down (4) to select

the massage type.

3. Press forward (5) or rearward (3)

to change the intensity.

«
...
74
75
76
77
78
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments