Cadillac CT62018 Owner'S Manual Download Page 13

Page: 13 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

IN BRIEF

Reclining Seatbacks

Platinum Seat Shown, Base and

Uplevel Seats Similar

To adjust the seatback:

Tilt the top of the control
rearward to recline.

Tilt the top of the control forward
to raise.

See

Reclining Seatbacks

Base Lumbar Adjustment

Base Seat

To adjust lumbar support, if equipped:

Press Forward (2) to move lumbar
support forward.

Press Rearward (1) to move
lumbar support rearward.

Massage

Platinum Driver Seat Shown,

Passenger Seat Similar

If equipped, the ignition must be on
to use the massage feature.

To activate and adjust the massage
feature:

1. Toggle the center selection

control (2) to view available
massage adjustment options on
the infotainment display.

2. Select massage feature.

3. Press the control up (3) or

down (5) to select the
massage type.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 13 / 445

Search results

Summary of Contents for CT62018

Reviews: