Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 284 / 445

Share

Page: 284 / 445

Cadillac CT62018 Owner'S Manual Download Page 284

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

DRIVING AND OPERATING

283

O

P

Symbol

Fault/Condition/Event

O

Solid Green

n

Flashing Red

R m

Charge Cord Fault: The charge cord has detected a potential
problem with the charge cord. Reset the charge cord by
unplugging from the electrical outlet and re-plugging it. If the
fault remains, see an authorized dealer for service.

If no status indicators are lit, ensure
the electrical outlet is powered.

Charge Limit Selection

Charge level selection can be made
using the Charge Limit Preference
screen on the infotainment display.
See

“

Charge Limit Selection

”

under

Programmable Charging (PLUG-IN Only)

.

{

Warning

Using a charge level that exceeds
the electrical circuit or electrical
outlet capacity may start a fire or
damage the electrical circuit. Use
the lowest charge level until a

(Continued)

Warning (Continued)

qualified electrician inspects the
electrical circuit capacity. Use the
lowest charge level if the electrical
circuit or electrical outlet capacity
is not known.

Grounding Instructions

This product must be grounded. If this
product should malfunction or break
down, grounding provides a path of
least resistance for electric current to
reduce the risk of electric shock. This
product is equipped with a cord that
has an equipment grounding
conductor and a grounding plug. The
plug must be plugged into an

appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.

{

Warning

Improper connection of the charge
cord ground may cause electrical
shock. Check with a qualified
electrician if there is doubt as to
whether the charge circuit is
properly grounded. Do not modify
the plug provided with the product.
If it will not fit the electrical outlet,
have a proper electrical outlet
installed by a qualified electrician.

«
...
282
283
284
285
286
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments