Cadillac CT62018 Owner'S Manual Download Page 176

Page: 176 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

INSTRUMENTS AND CONTROLS

175

Lighting

Select and the following may display:

Vehicle Locator Lights

Exit Lighting

Vehicle Locator Lights

This feature will flash the exterior
lamps and allows some of the exterior
lamps and most of the interior lamps
to turn on briefly when

on the

Remote Keyless Entry (RKE)
transmitter is pressed to locate the
vehicle.

Select Off or On.

Exit Lighting

This allows the selection of how long
the exterior lamps stay on when
leaving the vehicle when it is dark
outside.

Select Off, 30 Seconds, 60 Seconds,
or 120 Seconds.

Power Door Locks

Select and the following may display:

Unlocked Door Anti-Lockout

Auto Door Unlock

Delayed Door Lock

Unlocked Door Anti-Lockout

When on, this feature will keep the
driver door from locking when the
door is open. If Off is selected, the
Delayed Door Lock menu will be
available.

Select Off or On.

Auto Door Unlock

This allows selection of which of the
doors will automatically unlock when
the vehicle is shifted into P (Park).

Select Off, All Doors, or Driver Door.

Delayed Door Lock

When on, this feature will delay the
locking of the doors. To override the
delay, press the power door lock
switch on the door.

Select Off or On.

Remote Lock, Unlock, Start

Select and the following may display:

Remote Unlock Light Feedback

Remote Lock Feedback

Remote Door Unlock

Remote Start Auto Cool Seats

Remote Start Auto Heat Seats

Remote Window Operation

Passive Door Unlock

Passive Door Lock

Remote Left in Vehicle Alert

Remote Unlock Light Feedback

When on, the exterior lamps will flash
when unlocking the vehicle with the
RKE transmitter.

Select Off or Flash Lights.

Remote Lock Feedback

This allows selection of what type of
feedback is given when locking the
vehicle with the RKE transmitter.

Select Off, Lights and Horn, Lights
Only, or Horn Only.

Remote Door Unlock

This allows selection of which doors
will unlock when pressing

on the

RKE transmitter.

Select All Doors or Driver Door.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 176 / 445

Search results

Summary of Contents for CT62018

Reviews: