Cadillac CT62018 Owner'S Manual Download Page 42

Page: 42 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

KEYS, DOORS, AND WINDOWS

Replace the battery if the REPLACE
BATTERY IN REMOTE KEY message
displays in the DIC.

1. Press the button on the side of

the transmitter near the bottom
and pull the key out.

2. Separate the two halves of the

transmitter using a flat tool
inserted into the bottom center
of the transmitter. Do not use
the key slot.

3. Remove the old battery. Do not

use a metal object.

4. Insert the new battery on the

back housing, positive side facing
down. Replace with a CR2032 or
equivalent battery.

5. Align the front and back housing,

then snap the transmitter
together.

6. Reinsert the key.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 42 / 445

Search results

Summary of Contents for CT62018

Reviews: