Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 355 / 445

Share

Page: 355 / 445

Cadillac CT62018 Owner'S Manual Download Page 355

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

354

VEHICLE CARE

Use this rotation pattern if the
vehicle has different size tires on
the front and rear.

Different tire sizes should not be
rotated front to rear.

Use this rotation pattern when
rotating tires of the same size
installed on all four wheel
positions.

If the vehicle has a compact spare
tire, do not include it in the tire
rotation.

Adjust the front and rear tires to
the recommended inflation
pressure on the Tire and Loading
Information label after the tires
have been rotated.
See

Tire Pressure

and

.

Reset the Tire Pressure Monitor
System. See

Tire Pressure Monitor

Check that all wheel nuts are
properly tightened. See

“

Wheel

Nut Torque

”

under

Capacities and

Specifications

{

Warning

Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any rust
or dirt from places where the wheel
attaches to the vehicle. In an
emergency, a cloth or a paper towel
can be used; however, use a scraper
or wire brush later to remove all
rust or dirt.

Lightly coat the center of the
wheel hub with wheel bearing
grease after a wheel change or tire
rotation to prevent corrosion or
rust build-up. Do not get grease

«
...
353
354
355
356
357
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments