Cadillac CT62018 Owner'S Manual Download Page 62 | Manualshive

Page: 62 / 445

Cadillac CT62018 Owner'S Manual Download Page 62

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

KEYS, DOORS, AND WINDOWS

61

it is extended. It may re-extend after a
short delay when shifting into D
(Drive).

There is also a control for the rear
window sunshade on the rear door
panel.

Rear Passenger Door Sunshades

If equipped, use the handle to pull the
sunshade up and attach to the holder
at the top of the window.

To close the sunshade, use the handle
to unhook and hold it while it
retracts down.

Roof

Sunroof

If equipped with a sunroof, the
ignition must be on or in ACC/
ACCESSORY, or Retained Accessory
Power (RAP) must be active, to
operate the sunroof.
See

Ignition Positions

and

Retained Accessory Power (RAP)

1. SLIDE Switch
2. TILT Switch

«
...
60
61
62
63
64
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments