Cadillac CT62018 Owner'S Manual Download Page 50 | Manualshive

Page: 50 / 445

Cadillac CT62018 Owner'S Manual Download Page 50

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

KEYS, DOORS, AND WINDOWS

49

Power Trunk

Caution

You or others could be injured if
caught in the path of the power
trunk. Make sure there is no one in
the way of the power trunk as it is
opening and closing.

Caution

Do not mount any load-carrying
accessories, such as a bike rack or
luggage carriers, to the trunk of a
vehicle equipped with the power
trunk feature. This may damage the
power trunk system.

If equipped, to open the power trunk:

.

Press and release

|

on the

driver door. The driver door must
be unlocked, the ignition must be
on, or Retained Accessory Power
(RAP) must be active.

.

Press

X

twice quickly on the RKE

transmitter.

.

Press the touch pad on the rear of
the trunk after unlocking all doors
or with the RKE transmitter in
range for Keyless Access.

Monitor the trunk area to make sure
nothing will come in contact or move
into the path of the trunk lid when
power closing.

To close the power trunk:

.

Press and hold

|

on the driver

door until the trunk latches.
A chime will sound and a DIC
message will display when the
operation is complete.

.

Press the power trunk button on
the trunk lid.

Press any trunk button or the touch
pad to stop the power operation.
Pressing a trunk button again starts
the operation in the reverse direction.
The touch pad will not close the
trunk lid.

Do not manually force the trunk lid
open or closed during a power cycle.
The power trunk may be temporarily
disabled under extreme low
temperatures, or after repeated power
cycling over a short period of time.
The trunk can be opened manually.

«
...
48
49
50
51
52
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments