Cadillac CT62018 Owner'S Manual Download Page 11

Page: 11 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

IN BRIEF

From inside, press

. See

Power

Door Locks

Trunk

To open the trunk:

Press

twice quickly on the

Remote Keyless Entry (RKE)
transmitter.

Press the touch pad on the rear of
the trunk above the license plate
after unlocking all doors.

If equipped, these will also open the
power trunk. See

Trunk

Windows

The power windows work when the
ignition is on, in ACC/ACCESSORY,
or when Retained Accessory Power
(RAP) is active. See

Retained Accessory

Power (RAP)

224

Using the window switch, press to
open or pull to close the window.

The windows may be temporarily
disabled if they are used repeatedly
within a short time.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 11 / 445

Search results

Summary of Contents for CT62018

Reviews: