Cadillac CT62018 Owner'S Manual Download Page 24 | Manualshive

Page: 24 / 445

Cadillac CT62018 Owner'S Manual Download Page 24

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

IN BRIEF

23

and rapidly beeps or pulses the driver
seat. FPB can provide a boost to
braking or automatically brake the
vehicle.

See

Front Pedestrian Braking (FPB)

.

Lane Keep Assist (LKA)

If equipped, LKA may help avoid
crashes due to unintentional lane
departures. It may assist by gently
turning the steering wheel if the
vehicle approaches a detected lane
marking without using a turn signal in
that direction. It may also provide a
Lane Departure Warning (LDW) alert
as the lane marking is crossed. The
system will not assist or alert if it
detects that you are actively steering.
Override LKA by turning the steering
wheel. LKA uses a camera to detect
lane markings between 60 km/h (37
mph) and 180 km/h (112 mph).

See

Lane Departure Warning (LDW)

and

Lane Keep Assist (LKA)

.

Lane Change Alert (LCA)

If equipped, the LCA system is a
lane-changing aid that assists drivers
with avoiding lane change crashes
that occur with moving vehicles in the
side blind zone (or spot) areas or with
vehicles rapidly approaching these
areas from behind. The LCA warning
display will light up in the
corresponding outside mirror and will
flash if the turn signal is on. The Side
Blind Zone Alert (SBZA) system is
included as part of the LCA system.

See

Side Blind Zone Alert (SBZA)

and

Lane Change Alert (LCA)

Surround Vision

If equipped, views around the vehicle
display in the infotainment display to
aid with parking and low-speed
maneuvers.

See

“

Surround Vision

”

under

Assistance Systems for Parking or
Backing

.

Front Vision Camera

If equipped, a view of the area in front
of the vehicle displays on the
infotainment display to aid with
parking and low-speed maneuvers.

See

“

Front Vision Camera

”

under

Assistance Systems for Parking or
Backing

Rear Vision Camera (RVC)

If equipped, RVC shows a view of the
area behind the vehicle on the
infotainment display when the vehicle
is shifted into R (Reverse) to aid with
parking and low-speed backing
maneuvers.

See

Assistance Systems for Parking or

.

Rear Cross Traffic Alert
(RCTA) System

If equipped, the RCTA system uses a
triangle with an arrow displayed on
the infotainment display to warn of
traffic behind your vehicle that may
cross your vehicle's path while in
R (Reverse). In addition, beeps will
sound, or the driver seat will pulse.

«
...
22
23
24
25
26
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments