Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 274 / 445

Share

Page: 274 / 445

Cadillac CT62018 Owner'S Manual Download Page 274

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

DRIVING AND OPERATING

273

To Activate :

Touch Video Recorder

on the Home Page. Touch

#

.

#

will have a red dot when the video
recorder is on. It will remain on until
it has been turned off. Recording will
start after exiting the playback screen.
Advise other drivers and occupants of
the vehicle that video images are
being recorded.

To Deactivate :

Touch Video Recorder

on the Home Page. Touch

#

.

Select from the following when the
vehicle is in P (Park).

Exit :

Touch to exit this application

and return to the previous app.

Video List :

Touch to display a list of

the most recent and saved videos.
Touch the delete button next to the
name to delete a saved video.

Rewind :

Touch to rewind the video.

Touch again to stop rewinding.

Play/Pause :

Touch to play or pause a

recorded video.

Fast Forward :

Touch to fast forward

the video. Touch again to stop fast
forward.

Save :

Touch to save a video. This

protects the video from being erased.
Once the SD card is full, files will be
overwritten unless they have been
saved.

Front/Rear Camera View :

Select to

switch between the front and rear
camera views in playback.

Touching

S

Back returns to the

player view with video that was
previously loaded still showing.

The latest recorded video file can be
played. In addition:

.

There are approximately 12 hours
of video storage based on an 8GB
SD card. This could vary based on
exterior lighting conditions.

.

The recorded video is stored in
five-minute-long files.

.

All files can be viewed on the
playback app or when the SD card
is read by a personal
computer (PC).

.

Once the SD card is full, the oldest
files will be overwritten.

To Delete Data :

Remove the SD card

from the vehicle and insert into a PC
to manually delete the file.

Error messages can occur if:

.

No SD card is present.

.

An empty SD card is present.

.

The video files are the wrong
format.

.

The video files are corrupt.

.

The SD card is full.

.

There is a system error.

«
...
272
273
274
275
276
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments