Cadillac CT62018 Owner'S Manual Download Page 55 | Manualshive

Page: 55 / 445

Cadillac CT62018 Owner'S Manual Download Page 55

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

54

KEYS, DOORS, AND WINDOWS

transmitter will start the vehicle.
If the transmitter is ever damaged,
you may not be able to start your
vehicle.

When trying to start the vehicle, the
security light may come on briefly
when the ignition is turned on.

If the engine does not start and the
security light stays on, there is a
problem with the system. Turn the
ignition off and try again.

If the vehicle will not change ignition
modes (ACC/ACCESSORY, ON, OFF),
and the RKE transmitter appears to be
undamaged, try another transmitter.
Or, you may try placing the
transmitter in the transmitter pocket
located in the center console.

If the ignition modes will not change
with the other transmitter, your
vehicle needs service. If the ignition
does change modes, the first
transmitter may be faulty. See your
dealer.

It is possible for the immobilizer
system to learn new or replacement
RKE transmitters. Up to eight
transmitters can be programmed for
the vehicle. To program additional
transmitters, see

“

Programming

Transmitters to the Vehicle

”

under

Remote Keyless Entry (RKE) System
Operation

Do not leave the key or device that
disarms or deactivates the
theft-deterrent system in the vehicle.

Exterior Mirrors

Convex Mirrors

{

Warning

A convex mirror can make things,
like other vehicles, look farther
away than they really are. If you cut
too sharply into the right lane, you
could hit a vehicle on the right.
Check the inside mirror or glance
over your shoulder before changing
lanes.

The passenger side mirror is convex
shaped. A convex mirror's surface is
curved so more can be seen from the
driver seat.

«
...
53
54
55
56
57
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments