Cadillac CT62018 Owner'S Manual Download Page 117

Page: 117 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

116

STORAGE

Armrest Storage

Press the latch to access the storage
area in the rear armrest. Press the
button to extend the cupholders.

Push the cupholders in to close.

If equipped, there are seat controls on
the armrest. See

Rear Seats

Rear Storage

If equipped, press the lid to access the
storage compartment in the rear
doors.

Center Console Storage

Press the button and lift to access the
storage area. There is an auxiliary jack
and USB port(s) inside. See the
infotainment manual.

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 117 / 445

Search results

Summary of Contents for CT62018

Reviews: