Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 204 / 445

Share

Page: 204 / 445

Cadillac CT62018 Owner'S Manual Download Page 204

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

CLIMATE CONTROLS

203

9. Air Delivery Mode Control

Rear :

Touch Rear on the Home Page

of the infotainment display to open
the rear climate control display. The
rear climate control settings can now
be adjusted from the front
passenger area.

O

:

Press

O

or touch ON/OFF on the

rear climate control display to turn
the rear climate control on or off.

SYNC :

Touch SYNC on the rear

climate control display to match the
rear climate control temperature to
the front climate control driver
temperature. The SYNC button will
be lit.

Rear Control Lockout :

Touch to lock

or unlock control of the rear climate
control system from the rear seat
passengers. When locked, the rear
climate control can only be adjusted
from the front seat.

Automatic Operation

AUTO :

Press to turn on or off. The

air delivery is controlled
automatically. The AUTO indicator

appears on the display. If the air
delivery mode is manually adjusted,
this cancels full automatic operation.

Manual Operation

9

:

Press or press and hold the rear

fan button up or down to increase or
decrease the rear climate airflow. The
rear climate airflow can also be
adjusted by touching the fan controls
on the front climate control display.

Temperature Controls :

Press or

press and hold the rear temperature
control buttons up or down to adjust
the rear passenger temperatures. The
rear passenger temperatures can also
be adjusted by to for warmer
air or

−

for cooler air on the front

climate control display.

Air Delivery Mode Control :

Press or

press and hold the button up or down
to select the desired air delivery mode.
Touch the right and left arrows at the
bottom of the rear climate control
display to change the direction of the
airflow in the rear seating area.

Air Vents

Adjustable air vents are in the center
and on the sides of the instrument
panel, on the rear of the center
console storage, and in the headliner
over the rear seats, if equipped.

Move the slider knobs to change the
direction of or to close off the airflow.

Operation Tips

.

Clear away any ice, snow, or leaves
from air inlets at the base of the
windshield that could block the
flow of air into the vehicle.

«
...
202
203
204
205
206
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments