Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 321 / 445

Share

Page: 321 / 445

Cadillac CT62018 Owner'S Manual Download Page 321

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

320

VEHICLE CARE

The coolant reservoir for the TPIM is
filled with GM Premix DEX-COOL
coolant. See

Recommended Fluids and

. If using this mixture,

nothing else needs to be added.

The coolant needs to be replaced at
the appropriate interval. See

Maintenance Schedule

.

Checking Coolant

The vehicle must be on a level surface
when checking the coolant level.

The coolant reservoir is in the engine
compartment. See

Engine Compartment

.

Check to see if coolant is visible in the
reservoir. If coolant is visible but the
coolant level is below the indicated
mark, there could be a leak in the
cooling system.

Caution

Do not run the engine when there
is a leak in the PLUG-IN cooling
system. This can cause a loss of all
coolant and can damage the system
and the vehicle. Have any leaks
fixed right away.

How to Add Coolant to the
Coolant Reservoir

If no problem is found, add the proper
DEX-COOL coolant mixture at the
coolant reservoir.

The coolant reservoir pressure cap can
be removed when the cooling system,
including the pressure cap, is no
longer hot.

1. Turn the pressure cap

counterclockwise and remove it.

2. Fill the coolant reservoir with the

proper mixture to the indicated
mark on the side of the reservoir.

3. Reinstall the pressure cap tightly.

Caution

If the pressure caps are not secured
and tightened properly, coolant loss
and damage to the PLUG-IN cooling
systems or vehicle may occur. Make
sure the caps are properly and
tightly secured.

Check the level in the coolant
reservoir when the cooling system has
cooled down. If the coolant is not at
the proper level, repeat Steps 1 and 2,
then reinstall the pressure cap. If the
coolant still is not at the proper level
when the system cools down again,
see your dealer.

«
...
319
320
321
322
323
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments