Cadillac CT62018 Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 445

Cadillac CT62018 Owner'S Manual Download Page 32

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

IN BRIEF

31

Fuel (3.0L Twin Turbo
V6 Engine)

Premium Required Fuel

Use premium 93 octane unleaded
gasoline in your vehicle. Unleaded
gasoline with a 91 octane rating may
be used, but it will reduce
performance and fuel economy. See

Fuel (3.6L V6 Engine)

Regular Fuel

Use only unleaded gasoline rated
87 octane or higher in your vehicle.
Do not use gasoline with an octane
rating lower as it may result in vehicle
damage and lower fuel economy. See

E85 or FlexFuel

No E85 or FlexFuel

Gasoline-ethanol fuel blends greater
than E15 (15% ethanol by volume),
such as E85, cannot be used in this
vehicle.

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time to

change the engine oil and filter. The
oil life system should be reset to 100%
only following an oil change.

Resetting the Oil Life System

1. Using the DIC buttons, display

REMAINING OIL LIFE on the
DIC. See

Driver Information Center

2. Press and hold SEL to clear the

CHANGE ENGINE OIL SOON
message and reset the oil life
at 100%.

Be careful not to reset the oil life
display accidentally at any time
other than after the oil is
changed. It cannot be reset
accurately until the next oil
change.

The oil life system can also be reset as
follows:

1. Using the DIC buttons, display

REMAINING OIL LIFE on the
DIC. See

Driver Information Center

2. Fully press and release the

accelerator pedal three times
within five seconds.

«
...
30
31
32
33
34
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments