Cadillac CT62018 Owner'S Manual Download Page 172

Page: 172 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

INSTRUMENTS AND CONTROLS

171

To enable valet mode:

1. Enter a four-digit code on the

keypad.

2. Select Enter to go to the

confirmation screen.

3. Re-enter the four-digit code.

Touch LOCK or UNLOCK to lock or
unlock the system. Touch Back to go
back to the previous menu.

The four-digit code can be texted to a
paired phone if forgotten by pressing
Option on the Valet Mode lock screen.

Teen Driver

See

“

Teen Driver

”

under

“

Settings

”

the infotainment manual.

Radio

Select and the following may display:

Manage Favorites

Number of Favorites Shown

Audible Touch Feedback

Bose Audio Pilot

Maximum Start Up Volume

Manage Favorites

This allows favorites to be edited. See

“

Manage Favorites

”

“

Settings

”

under

“

Radio

”

in the infotainment manual.

Number of Favorites Shown

Touch to set the number of favorites
to display.

Select the desired number or select
Auto and the infotainment system will
automatically adjust the number of
favorites shown.

Audible Touch Feedback

This allows Audible Touch Feedback
to be turned on or off.

Select Off or On.

Bose Audio Pilot

This feature adjusts the volume based
on the noise in the vehicle. See

“

Bose

AudioPilot Noise Compensation
Technology

”

under

“

Infotainment

System Settings

”

in the infotainment

manual.

Select Off or On.

Maximum Start Up Volume

This feature sets the maximum
startup volume. If the vehicle is
started and the volume is greater than
this level, the volume is adjusted to
this level.

To set the maximum startup volume,
touch + or

−

to increase or decrease.

Vehicle

Select and the following may display:

Climate and Air Quality

Collision/Detection Systems

Comfort and Convenience

Energy

Lighting

Power Door Locks

Remote Lock, Unlock, Start

Climate and Air Quality

Select and the following may display:

Auto Fan Speed

Air Quality Sensor

Auto Cooled Seats

Auto Heated Seats

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 172 / 445

Search results

Summary of Contents for CT62018

Reviews: