Cadillac CT62018 Owner'S Manual Download Page 64 | Manualshive

Page: 64 / 445

Cadillac CT62018 Owner'S Manual Download Page 64

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

KEYS, DOORS, AND WINDOWS

63

If frost or other conditions prevent
closing, override the feature by closing
the sunroof in manual mode. To stop
movement, release the switch.

Dirt and debris may collect on the
sunroof seal or in the track. This
could cause an issue with sunroof
operation or noise. It could also plug
the water drainage system.
Periodically open the sunroof and
remove any obstacles or loose debris.
Wipe the sunroof seal and roof sealing
area using a clean cloth, mild soap,
and water. Do not remove grease from
the sunroof.

If water is seen dripping into the
water drainage system, this is normal.

«
...
62
63
64
65
66
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments