Cadillac CT62018 Owner'S Manual Download Page 20

Page: 20 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

IN BRIEF

To enable or disable this feature, see

“

Rainsense Wipers

”

under

Vehicle

Personalization

170

OFF :

Use to turn the wipers off.

1X :

For a single wipe, briefly move

the lever down. For several wipes, hold
the lever down.

Pull the lever toward you to

spray windshield washer fluid and
activate the wipers.

See

Windshield Wiper/Washer

120

Climate Controls

The climate control buttons on the center stack and on the climate control
display are used to adjust the heating, cooling, and ventilation.

Dual and Quad Zone Climate Control Buttons

1. Driver and Passenger

Temperature Controls

2. Fan Control

3. Driver and Passenger Heated and

Ventilated Seats (If Equipped)

4. Rear Window Defogger

5. Defrost

6. OFF (Fan)

7. Recirculation

8. AUTO (Automatic Operation)

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 20 / 445

Search results

Summary of Contents for CT62018

Reviews: