Cadillac CT62018 Owner'S Manual Download Page 92 | Manualshive

Page: 92 / 445

Cadillac CT62018 Owner'S Manual Download Page 92

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/15/17

SEATS AND RESTRAINTS

91

.

The vehicle has a crash sensing
and diagnostic module which
records information after a crash.
See

Vehicle Data Recording and

and

.

.

Let only qualified technicians
work on the airbag systems.
Improper service can mean that
an airbag system will not work
properly. See your dealer for
service.

Passenger Sensing System

The vehicle has a passenger sensing
system for the front outboard
passenger position. The passenger
airbag status indicator will light on
the overhead console when the vehicle
is started.

United States

Canada

The words ON and OFF, or the symbol
for on and off, will be visible during
the system check. When the system
check is complete, either the word ON
or OFF, or the symbol for on or off,
will be visible. See

Passenger Airbag

Status Indicator

The passenger sensing system turns
off the front outboard passenger
frontal airbag and knee airbag under
certain conditions. No other airbag is
affected by the passenger sensing
system.

The passenger sensing system works
with sensors that are part of the front
outboard passenger seat and seat belt.
The sensors are designed to detect the
presence of a properly seated
occupant and determine if the front
outboard passenger frontal airbag and
knee airbag should be allowed to
inflate or not.

According to accident statistics,
children are safer when properly
secured in a rear seat in the correct
child restraint for their weight
and size.

Whenever possible, children aged
12 and under should be secured in a
rear seating position.

Never put a rear-facing child seat in
the front. This is because the risk to
the rear-facing child is so great, if the
airbag inflates.

{

Warning

A child in a rear-facing child
restraint can be seriously injured or
killed if the passenger frontal airbag
inflates. This is because the back of
the rear-facing child restraint would
be very close to the inflating airbag.
A child in a forward-facing child
restraint can be seriously injured or
killed if the passenger frontal airbag
inflates and the passenger seat is in
a forward position.

(Continued)

«
...
90
91
92
93
94
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments