Home
/
Cadillac
/
CT62018
/
Owner'S Manual

Cadillac CT62018, Owner'S Manual, Page: 209 / 445

Share

Page: 209 / 445

Cadillac CT62018 Owner'S Manual Download Page 209

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

208

DRIVING AND OPERATING

Average driver reaction time is about
three-quarters of a second. In that
time, a vehicle moving at 100 km/h
(60 mph) travels 20 m (66 ft), which
could be a lot of distance in an
emergency.

Helpful braking tips to keep in mind
include:

.

Keep enough distance between
you and the vehicle in front
of you.

.

Avoid needless heavy braking.

.

Keep pace with traffic.

If the engine ever stops while the
vehicle is being driven, brake normally
but do not pump the brakes. Doing so
could make the pedal harder to push
down. If the engine stops, there will
be some power brake assist but it will
be used when the brake is applied.
Once the power assist is used up, it
can take longer to stop and the brake
pedal will be harder to push.

Braking (PLUG-IN Only)

Braking action involves perception
time and reaction time. Deciding to
push the brake pedal is perception
time. Actually doing it is
reaction time.

Average driver reaction time is about
three-quarters of a second. In that
time, a vehicle moving at 100 km/h
(60 mph) travels 20 m (66 ft), which
could be a lot of distance in an
emergency.

Helpful braking tips to keep in mind
include:

.

Keep enough distance between
you and the vehicle in front
of you.

.

Avoid needless heavy braking.

.

Keep pace with traffic.

The brake system is not affected by
whether or not the engine is running.
If there is a brake controller fault, the
brakes may lose power assist. More
effort will be required to stop the
vehicle.

Steering

Variable Effort Steering

The vehicle has a steering system that
varies the amount of effort required to
steer the vehicle in relation to the
speed of the vehicle.

The amount of steering effort required
is less at slower speeds to make the
vehicle more maneuverable and easier
to park. At faster speeds, the steering
effort increases to provide a sport-like
feel to the steering. This provides
maximum control and stability.

Electric Power Steering

The vehicle has electric power
steering. It does not have power
steering fluid. Regular maintenance is
not required.

If power steering assist is lost due to a
system malfunction, the vehicle can
be steered, but may require increased
effort. See your dealer if there is a
problem.

«
...
207
208
209
210
211
...
»

Summary of Contents for CT62018






























































































































































































































































































































































































































































Reviews:

No comments