Cadillac CT62018 Owner'S Manual Download Page 183

Page: 183 / 445

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-11292458) -

2018 - crc - 2/14/17

182

INSTRUMENTS AND CONTROLS

Erasing Universal Remote
System Buttons

Erase all programmed buttons when
vehicle ownership is terminated.

To erase:

1. Press and hold the two outside

buttons until the indicator light
begins to flash. This should take
about 10 seconds.

2. Release both buttons.

Reprogramming a Single
Universal Remote System Button

To reprogram any of the system
buttons:

1. Press and hold any one of the

buttons. Do not release the
button.

2. The indicator light will begin to

flash after 20 seconds. Without
releasing the button, proceed
with Step 1 under

“

Programming

the Universal Remote System.

”

Summary of Contents for CT62018






























































































































































































































































































































































































































































Search results

Summary of Contents for CT62018

Reviews:

Cadillac CT62018, Owner'S Manual, Page: 183 / 445

Search results

Summary of Contents for CT62018

Reviews: